Panorama shooting
50
4
Additional shooting functions
2 Make sure that the edges of the pictures overlap, then take
the pictures.
• The focus, exposure, and white balance are set by the first picture. Do not
select an extremely bright subject (such as the sun) for the first picture.
• You cannot adjust the zoom after the first picture.
• Panorama shooting is possible for up to 10 pictures.
• When you have taken 10 pictures, a
warning mark g is displayed.
3 Press Z to exit panorama shooting.
Note
• Panorama mode can only be used when there is a card in the camera.
Moreover, panorama mode is only available with Olympus cards.
• During panorama shooting, the flash and sequential shooting modes are not
available.
• The camera itself cannot connect panorama pictures. The OLYMPUS Master
software is necessary to connect the pictures.