36
Playback
En
1
Display the picture you want to protect.
2
Press the (protect) button.The picture is now protected.
● The mark appears on the protected picture.
● To cancel protection, press again.
Protecting pictures
It is highly recommended that you protect important pictures to avoid
accidentally erasing them. Protected pictures cannot be erased by the single-
frame/all-frame erase function.
Single-frame erase
This function only erases the picture displayed on the monitor. Erasing further
pictures must be done one-by-one if using this function.
1
Display the picture you want to erase.
2
Press the (erase) button.
● The ERASE screen is displayed.
3
Press to select YES.
● To cancel erasing, select NO and press .
4
Press to erase the picture.
● The picture is erased and the menu disappears.
1
In the top menu, select MODE MENU T CARD T CARD SETUP and
press .
2
Press to select ALL ERASE, then press .
3
Press to select YES, then press .
● The BUSY bar is displayed to show the progress of erasing and all the
pictures are erased.
All-frame erase
This function erases all still pictures and movies on the card.
1 C-60_B-EN1 04.2.24 4:27 PM Page 36