Filter
Top Products
9
Getting started
En
The memory gauge lights up when the camera is storing a still picture you
have just taken on the card. The memory gauge indication changes as shown
below depending on the shooting status. The memory gauge does not appear
during movie recording.
Memory gauge
Shoot
Wait
Before
shooting
(Gauge is off)
Battery check
Lights (green)
Remaining power
level: High*
Lights (red)
Remaining power level: Low.
If you intend to use the
camera for a long period of
time, charge the battery as
soon as possible.
No indication
The green lamp and orange
lamp next to the viewfinder
blink.
Remaining power level:
Exhausted. Replace with a
charged battery.
If the remaining battery power is low, the battery check indication changes as
follows when the camera is turned on or while the camera is in use.
One picture taken
(Lit)
When taking still pictures
Shoot Shoot
Wait Wait
No more pictures can be taken
(Fully lit). Wait until the gauge
returns to the status on the left
to take the next shot.
* Your digital camera's power consumption varies greatly depending on usage and
operating conditions. Under some operating conditions, the camera may turn off without
warning that battery power is low. If this occurs, re-charge the battery.
Memory gauge
1 C-60_B-EN1 04.2.24 4:27 PM Page 9