14
Getting started
Inserting the card (SmartMedia)
This reference manual uses the term “card” when referring to SmartMedia.
The card is convenient, for example, when you are traveling and you want to
take a lot of pictures. When the card is inserted, the pictures you have taken
are stored on the card. When no card is inserted, the pictures are stored in
the camera’s internal memory.
Card basics
Images recorded and stored on the card can easily be erased, overwritten,
and/or edited on a PC.
The following cards can be used:
• Provided 8 MB standard card
• Optional Olympus CAMEDIA-brand cards (4 MB - 128 MB)
• Commercially available 3 V (3.3 V) cards (4 MB - 128 MB)
c
Contact area
Comes into contact with the camera’s signal read contacts.
d
Write-protect area
Attach the provided write-protect seal when you want to protect
your data from accidental erasure or overwriting.
e
Index area
Use the provided index label to indicate the card’s contents.
• 2 MB cards cannot be used.
• Commercially available 5 V cards cannot be used.
• This camera may not recognize a non-Olympus card (such as a 3 V
(3.3 V)), or a card that was formatted on another device (such as a
PC, etc.). Before use, be sure to format the card on this camera.
“Formatting (Card setup/Memory setup)” ( p.74)
Handling precautions
• Operating temperature: 0°C to 55°C (32°F to 131°F); Storing
temperature: -20°C to 65°C (-4°F to 149°F); Humidity: up to 95%
• Put the card into its anti-electrostatic case for storage or transportation.
• Do not bend, drop, or apply any physical shock to the card.
• Do not touch the contact area of the card.
• Do not reuse the write-protect seal.
• Read the provided SmartMedia instruction manual carefully.
c
d
e