Filter
Top Products
Getting Started
Turning the Power On in the Playback Mode
• Make sure the lens barrier is closed.
• Press the monitor button.
Standby mode
If the camera is left untouched for three minutes when using the
batteries, it automatically turns off. It is strongly recommended, however,
that you switch power off promptly when you are finished using the
camera.
When using new batteries, it may take longer for the camera to shut
down automatically depending on the type of batteries being used.
Turning the Power Off in Playback Mode
Press the monitor button.
Displaying Images Frame by Frame
Press the monitor button with the lens
barrier closed to turn on power in
playback mode and display the last
image taken.Images will be displayed
on the monitor, along with the
information in the right diagram.
Pressing ୴ on the arrow pad displays
the previous image, ୴ the next
image, ̅ the 10th image back, ̃ the
10th image ahead.
Displaying All Frames (Index-Display Setting)
Press the monitor button with the lens barrier closed to turn on power in
playback mode and display the last image taken. Push the zoom lever
to W to display the last several frames taken. In the index-display
setting, press ̅ on the arrow pad to display the previous set of frames
from the upper left corner, or press ̃ to display the next set from the
lower right corner.Press ୵ to select a frame to the left on the display, or
୴ to select a frame to the right. Pull the zoom lever toward T to display
a full-sized version of the selected image.
12
Playing Images Back
HQ
23. 12. ’00
23:45 124
Record mode
Protect
Date
Time
Frame number
Battery check
Print reserve
Movie
Monitor