Filter
Top Products
35
EN
Basic photography and useful functions
1
Panoramas
If you have installed the supplied computer software (ib), you can use it to join
pictures together to form a panorama. g “Installing the supplied computer
software (ib)” (P. 88)
Taking pictures for a panorama
1
Rotate the mode dial to SCN.
2
Select [PANORAMA] and press i.
3
Use FGHI to choose a pan direction.
250250 F5.6
3838
M
4
Take a picture, using the guides to frame
the shot.
Focus, exposure, and other settings are fi xed at the values for the fi rst shot.
5
Take the remaining images, framing each shot so that the guides
overlap with the previous picture.
250250 F5.6
3838
M
[
3
]
[
2
]
EXITEXIT
M
EXITEXIT
A panorama may include up to 10 images. A warning indicator (
g
) is displayed
after the tenth shot.
6
After taking the last shot, press i to end the series.
# Caution
During panorama shooting, the image previously taken for position alignment will
not be retained. With the frames or other markers for display in the images as a
guide, set the composition such that the edges of the overlapping images overlap
within the frames.
$ Notes
Pressing the i button before shooting the fi rst frame returns to the scene mode
selection menu. Pressing the i button in the midst of shooting ends the sequence
of panorama shooting, and allows you to continue with the next one.
•
•
•
•