Filter
Top Products
70
EN
Camera setup
6
Resetting the camera settings
In P, A, S, or M mode, current camera settings (including any changes you
have made) are retained when the power is turned off. To reset the camera to
the factory default settings, set [RESET]. You can register settings in advance to
[RESET1] and [RESET2].
The camera settings at that time are registered in [RESET1] and [RESET2]. For
details on the registered functions, refer to “Functions that can be registered with
My Mode and Custom Reset Setting” (P. 104).
Registering [RESET1]/[RESET2]
1
Select [CUSTOM RESET] in shooting menu W (P. 106).
2
Select either [RESET1]/[RESET2] to register and press I.
If settings have already been registered, [SET] is displayed next to [RESET1]/
[RESET2]. Selecting [SET] again overwrites the registered setting.
To cancel the registration, select [RESET].
3
Select [SET] and press the i button.
Using reset settings
This resets the camera to the factory default settings. You can also reset the
camera to the [RESET1] or [RESET2] setting.
1
Select [CUSTOM RESET] in shooting menu W (P. 106).
2
Select [RESET], [RESET1], or [RESET2] and press the i
button.
[RESET]: Resets to the factory default settings. For
the default settings, see “Menu directory” (P. 106).
[RESET1]/[RESET2]: Resets to the registered set-
tings.
3
Use FG to select [YES], then press the
i button.
# Caution
•
•
RESET1
YES
NO
BACK
SET
The following settings are unaffected. For defaults, see “Menu directory” (P. 106).
RESET1, RESET2 (CUSTOM RESET)/PICTURE MODE/ X/ W/ s/MY MODE
SETUP/VIDEO OUT/ISO-AUTO/WB/EDIT FILENAME/dpi SETTING/EXPOSURE
SHIFT/8WARNING LEVEL
•
•
•