Filter
Top Products
84
EN
Printing pictures
8
Images recorded in RAW data cannot be printed.
You cannot print movie images.
The camera will not enter sleep mode while it is connected to the USB cable.
Connecting the camera to a printer
Use the provided USB cable to connect the camera to a PictBridge-compatible
printer.
1
Turn the printer on and connect the camera's multi-connector to
the printer's USB port with the USB cable.
For details on how to turn the printer on and the position of the USB port, refer
to the printer's manual.
Multi-connector Smaller terminal
USB cable
Look for this mark.
USB port
2
Turn on the camera.
The selection screen for the USB connection is displayed.
3
Use FG to select [PRINT].
[ONE MOMENT] is displayed and the camera and
printer are connected. Go to “Custom printing” (P. 85).
# Caution
If the screen is not displayed after a few minutes,
disconnect the USB Cable and start again from Step 1.
•
•
STORAGE
MTP
PRINT
EXIT
USB
SET
Easy printing
1
Use HI to display the pictures you want
to print on the camera.
Display the image you want to print on the camera
and connect the camera with a printer using a USB
cable.
2
Press I.
•
EASY PRINT START
PC/CUSTOM PRINT
The picture selection screen appears when printing is completed. To print an-
other picture, use HI to select the image and press the i button.
To exit, unplug the USB cable from the camera while the picture selection
screen is displayed.
•
•
•
•
•
•
•