Olympus FE-220 Digital Camera User Manual


 
Using OLYMPUS Master
EN 43
2 Connect the multi-connector on the camera
to the USB port on the computer using the
provided USB cable.
Refer to your computer’s instruction manual to
locate the position of the USB port.
The camera turns on automatically.
The monitor turns on and the selection screen for
the USB connection is displayed.
3 Select [PC], and press i.
4 The camera is recognized by the computer.
Windows
When you connect the camera to your computer for the first time, the computer
attempts to recognize the camera. Click “OK” to exit the message that is
displayed. The camera is recognized as a “Removable Disk”.
Macintosh
The iPhoto program is the default application for managing digital images.
When you connect your digital camera for the first time, the iPhoto application
starts automatically, so close this application and start OLYMPUS Master.
Note
The camera functions are disabled while the camera is connected to a computer.
Connecting the camera to a computer via a USB hub may cause unstable operation.
In this case, do not use a hub, but connect the camera directly to the computer.
Images cannot be transferred to your computer with OLYMPUS Master if [PC] is
selected in Step 3, Y is pressed and [MTP] is selected.
Windows
1 Double-click the “OLYMPUS Master 2” icon on the desktop.
Start up the OLYMPUS Master software
Multi-connector
Connector cover
OK
[IN]
SET
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT