Filter
Top Products
is displayed on the LCD panel while the
film is rewinding.
*Open the back cover, and remove the film
cartridge from the camera.
WARNING: Do not touch the shutter curtain inside
the camera while removing the film
cartridge
NOTE: If the power is turned OFF while rewinding,
operations will stop. However, rewind mode
is not cancelled. Rewinding will continue
when the power switch is turned ON again.
— Once the film has been rewound, a blinking "E"
and will be displayed on the LCD panel.
Further operations are not possible until the
rewound film cartridge is removed.
— 11 —