Filter
Top Products
157
Troubleshooting
Miscellaneous
10
zWhen the camera is connected to a PC.
The camera is
connected to a TV.
The monitor does not function when the video
cable is connected to the camera.
P.116
The picture is not erased.
The picture you want
to erase is protected.
You cannot erase pictures with the 0 mark.
Press the 0 button to cancel the protection.
P.118
No picture is displayed on the TV when connected to the camera.
The video output
signal is incorrect.
Set the video output signal according to the region
where used.
P.143
The TV video signal
setting is incorrect.
Set the TV to the video input mode. P.116
The monitor is hard to see.
The brightness of the
monitor is not
adjusted properly.
Select s in the mode menu and adjust the
brightness.
P.135
The monitor is
exposed to direct
sunlight.
Block the sunlight with your hand or use the
viewfinder.
—
Possible cause Corrective action Ref. Page
The camera is not recognized by the PC.
The USB driver
cannot be installed
It is necessary to install the USB driver for
Windows 98/98 SE. For how to install, see
“DIGITAL CAMERA-PC CONNECTION
OPERATION MANUAL” on the CD-ROM.
—
The power of the
camera has not been
turned on.
Set the power switch to ON to turn on the camera. P.24