Filter
Top Products
30 En
En
Auto-flash (No indication)
The flash fires automatically in low light or backlight conditions.
Red-eye reduction flash (!)
The red-eye reduction flash mode significantly reduces the red-eye
phenomenon by emitting pre-flashes before firing the regular flash.
Fill-in flash (#)
The flash always fires every time the shutter button is pressed.
Flash off ($)
The flash does not fire even in low light conditions.
Slow synchronization #SLOW1 #SLOW2 !#SLOW1
1st curtain (front curtain) #SLOW1 (factory default setting):
Adjusts the flash for slow shutter speeds.
2nd curtain (rear curtain) #SLOW2:
The 2nd curtain fires the flash just before the shutter closes.
1st curtain with red-eye reduction !#SLOW1:
Adjusts the flash for slow shutter speeds, and minimizes red-eye.
J USING THE SELF-TIMER/REMOTE
CONTROL
Self-timer : This function is useful for taking pictures with yourself
included in the photograph.
Remote control : Shooting is possible using the remote control device (sold
separately in some regions). This is useful when you want
to take a picture with yourself in it or a night scene, without
touching the camera.
1
Mount the camera on a tripod or place it on a stable, flat surface.
2 Select Y (self-timer) or < (remote control) by pressing
Z.
•
The setting changes between
Y
/
<
OFF,
Y
and
<
each time
Z
is pressed.
3 Take the picture.
• When using the remote control device, point it at the remote control
receiver on the camera and then press the shutter button on the device.
Self-timer : The self-timer/remote control lamp lights for about 10
seconds, then starts blinking. After blinking for about
2 seconds, the picture is taken.
Remote control: The self-timer/remote control lamp blinks for about 2
seconds before taking the picture.he picture is taken.
basic_e_d4209_7.fm Page 30 Thursday, December 25, 2003 1:36 PM