Filter
Top Products
36 En
En
J ERASING PICTURES
This function erases recorded pictures. Pictures can be erased either one
frame at a time or all the pictures in the card.
• Once erased, pictures cannot be restored. Check each picture
before erasing to avoid accidentally erasing pictures you want to
keep.
Single-frame erase
1
Use the arrow pad to display the picture you want to erase.
2 Press S.
•The S ERASE screen is displayed.
3 Press ac to select YES, then press e.
• The picture is erased and the menu is closed.
All-frame erase
1 In the top menu, select MODE MENU CARD CARD
SETUP, and press d.
2 Press ac to select R ALL ERASE, then press e.
3 Press a to select YES, then press e.
• All the pictures are erased.
J FORMATTING (CARD SETUP)
This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
• All existing data, including protected pictures, are erased when the
card is formatted. Make sure that you save or transfer important
data to a PC before formatting a card.
1 In the top menu, select MODE MENU CARD CARD
SETUP, and press d. Press ac to select I FORMAT,
then press e.
•The I FORMAT screen is displayed.
2 Press a to select YES, then press e.
•The BUSY bar is displayed and the card is formatted.
Note
Note
basic_e_d4209_7.fm Page 36 Thursday, December 25, 2003 1:36 PM