Filter
Top Products
47
VIEWING OR ERASING IMMEDIATELY AFTER SHOOTING
Erasing All Pictures (All-Frame Erase)
Check that the camera is set to the
Playback mode by holding down the
monitor button for a moment.
The following operation clears the card of all stored image data.
Operating Procedure
1. Select by pressing the or
arrow pad key.
2. Select “YES” by pressing the or
arrow pad key, and then press the
OK/menu button.
3.
Select by pressing the or
arrow pad key.
4. Select “YES” by pressing the or
arrow pad key.
5. Press the OK/menu button.
[All of the image frame data saved in the
card will be erased.
To cancel erasure:
Select “NO” and press the
OK/menu button.
Erasure time may be prolonged if
the card has been subjected to
print reservation by DPOF (
Page 74). This is not a malfunction.
ⅷ Erasure is not possible if the
image to be erased is protected or
a write protect seal is attached to
the card. ( Page 51)
ⅷ For details on handling your card,
refer to the instructions provided
with it.
1/3
SET
OK
SELECT
NO
OFF
NO
NO
NO
NO
SET
OK
SELECT
Check the following before
erasing images
To prevent destruction of data on the card, never attempt to open the card cover,
remove the batteries, disconnect the AC adapter or remove the card during
erasure.
SET
OK
NO
OFF
YES
NO