Filter
Top Products
Menu operations
EN 23
Pictures taken with the camera held vertically are displayed horizontally. This function
lets you turn such pictures so that they are displayed vertically. New picture
orientations are saved even when the power is turned off.
Select an image with XY and then to rotate the display select [+90°]/[0°]/[-90°] with
ON. You can rotate several frames in succession.
Protected pictures cannot be erased with single frame
erase or erase all, but they are erased during formatting.
• Select the picture with XY, and protect it by selecting
[ON] with ON. You can protect several frames in
succession.
Protected pictures cannot be erased. Cancel protection before erasing protected
pictures. Once erased, pictures cannot be restored. Check each picture before
erasing to avoid accidentally erasing pictures you want to keep.
• When erasing the pictures in the internal memory, do not insert the card into the
camera.
• When erasing the picture from the card, insert a card into the camera in advance.
• Use the arrow pad to select the picture, and then press
i to put a 9.
•Press i again to cancel the selection.
• When the selection is completed, press S.
• Select [YES], and press i.
3 ROTATE Rotating pictures
+90° /
0° /-90°
4 PROTECT Protecting pictures
OFF /ON
5 ERASE Erase selected pictures/Erase all pictures
SEL. IMAGE.............................................................. Erase by selecting single-frames
OK
EXIT
ROTATE
ROTATE
+90°
OK
EXIT
ROTATE
ROTATE
0°
-90°
OK
EXIT
ROTATE
ROTATE
OK
EXIT
OFF
ON
PROTECT
SEL. IMAGE
GO
OK
BACK
MENU