Filter
Top Products
50 EN
Getting to know your camera better
Getting to know your camera better
The battery is not fully charged
• Charge the battery with the charger.
The battery is temporarily unable to function because of the cold
• Battery performance declines in low temperatures, and the charge may not be
sufficient to turn on the camera. Remove the battery and warm it by putting it in your
pocket for a while.
The camera is in sleep mode
• To save battery power, the camera automatically goes into sleep mode and the
monitor turns off if there is no operation when the camera is turned on. No picture
is taken even if the shutter button is fully pressed in this mode. Operate the zoom
lever or other buttons to restore the camera from sleep mode before taking a
picture. If the camera is left for 15 minutes, it automatically turns off. Press o
to turn the camera on.
The mode dial is in the position of g
• No pictures can be taken when the guide is being displayed. Do the settings
according to the guide and then shoot a picture or set the mode dial to something
other than g and shoot a picture.
The flash is charging
• Wait until the # (flash charge) mark stops blinking before pushing the shutter
button again.
The memory gauge is full
• No pictures can be taken when the memory gauge is full. Wait until there is space
in the memory gauge.
Shooting tips and information
Tips before you start taking pictures
The camera does not turn on even when a battery is loaded
No picture is taken when the shutter button is pressed
a b c d
Before taking
any pictures
(Off)
Maximum
reached
(All lit)
After taking
one picture
(Lit)
After taking
several pictures
(Lit)
Shoot Shoot Shoot
Wait