Filter
Top Products
EN 21
Menu operations
When activated [ON], the camera will record about 4 seconds of audio after the picture is taken.
When recording, aim the camera microphone at the source of the sound you want to record.
Panorama shooting lets you create a panoramic picture, using the OLYMPUS Master software
from the provided CD-ROM. An Olympus xD-Picture Card is required for panorama shooting.
Use the arrow pad to specify at which edge you want to connect the pictures, and then compose
your shots so that the edges of the pictures overlap. The part of the previous picture where it will
be joined to the next picture does not remain in the frame. You have to remember what the part in
the frame looked like and take the next picture so it overlaps.
Panorama shooting is possible for up to 10 pictures. Press
o
to exit panorama shooting.
This function allows you to turn off operational sounds that occur during shooting and playback,
warning beeps, shutter sounds, etc.
It cannot be set when the mode dial is set to
g
.
AF MODE............................................................................
Changing the focusing area
iESP The camera determines which subject within the screen to focus on. Even
when the subject is not in the center of the screen, focusing is possible.
SPOT Focus selection is based on the subject within the AF target mark.
R
..............................................................................
Recording sound with still pictures
OFF /ON
PANORAMA
...............................................................................Creating a panoramic picture
5 SILENT MODE Setting to turn off operational sounds
OFF /ON
Connects pictures from
left to right
Connects pictures from
bottom to top
3: The next picture is connected at the
right edge.
4: The next picture is connected at the
left edge.
1: The next picture is connected at the
top.
2: The next picture is connected at the
bottom.
d4314_15_e.book Page 21 Monday, June 26, 2006 7:13 PM