Printing
Tip
When you print in 306 dpi
in the application
software, set the picture
size to 1376 x 1024 pixels.
Start the application software used to print, and
select the image to be printed.
Click [Print] from the [File] menu of the
application.
The [Print] dialog appears.
Click [Setup].
The [Print Setup] dialog appears.
Set the printer.
1
2
3
4
The dialog differs depending on the application.
Set [Specific Printer] to [OLYMPUS P-330].
Set [Size] referring to the combination below.
Notes
• Use the set of the print
paper and ink ribbon
cartridge supplied
together in the same
carton. Also make sure
to set [Size] in the
combination shown in
the table. If you use
them in different
combination, proper
printing results may
not be obtained or
other trouble may
occur.
• For the details on print
paper and ink ribbon
cartridge, refer to the
operating instructions
of the printer.
Set [Orientation].
To print in portrait (tall) format, select Portrait.
To print in landscape (wide) format, select
Landscape.
For Windows 3.1
Print paper
loaded
Ink ribbon
cartridge loaded
[Size] setting
Standard paper
4-,16-Cut Sticker
Passport photo
paper
Standard type
Standard type
Passport photo
type
A6 Standard/Sticker
A6 Standard/Sticker
A6 Passport photo
paper
22