Filter
Top Products
23
How to install and connect the unit
6 Connect the rear panel connectors.
Anchor the AC adapter cable in place using the cable clamp.
Cable clamp
Cable clamp
LAN cable
LAN cable
Interface cable
Interface cable
Video output cable
Coaxial cables
AC adapter cable
AC adapter cable
[AW-HE50H]
[AW-HE50S]
Square hole (one at either side)
Square hole (one at either side)
Tab (one at either side)
Tab (one at either side)
Screw for cable cover (M3 screw)
(with flat washer, spring washer)
Screw for cable cover (M3 screw)
(with flat washer, spring washer)
7 Attach the cable cover.
Fit the two tabs on the cable cover into the square mounting hole at either side of the rear panel.
Secure the cable cover using the screw (M3 20 mm) provided.
Screw diameter Clamping torque
M3 0.78 N · m (8 kgf · cm)
Engage the tabs on the cable cover so they fit into place perfectly, and check that the cover is not rickety.
Note