Panasonic AG-AC130AP Camcorder User Manual


 
75
Displays
29 Information display
The following information is displayed
depending on the situation.
Performance of the auto white balance or the
auto black balance
Warning (Page 76)
The ND lter recommended under the current
shooting conditions is displayed.
The AWB error message ([LOW LIGHT]/
[LEVEL OVER]) (Page 21)
The functions assigned to the USER buttons
while you hold down the <DISP/MODE CHK>
button.
30 Time stamp display
Displayed when the [TIME STAMP] item on the
setup menu [RECORDING SETUP] screen is
[ON].
31 Audio level meter display (Page 39)
32 Auto iris control display
[
STD
]: Standard auto iris control
[
SPOT
]: Auto iris control for spotlight
[
BACK
]: Auto iris control for the backlight
compensation
33 IRIS METER display
Displays the preceding bar in the bottom right
of the LCD monitor/viewnder.
Center: Indicates the normal light intensity.
Right: Indicates high-light intensity.
Left: Indicates low-light intensity.
Green dots on display:
Indicate the compensation amount
during AUTO IRIS.
34 Iris display
Displays F value.
35 Shutter speed display
Displays the shutter speed.
36 Monitor audio level meter
When you press the <AUDIO MON/ADV>
button, the sound volume output from the built-
in speaker and headphone jack is displayed.
37 DV control device status display (DV mode
only)
Displays the status of the device connected to
the <DV OUT> terminal.
[
] (red): Shooting
[
] (red):
Shooting paused
[
]:
Device cannot be controlled or
cannot be in shooting/shooting
pause status
[
]: Device is not connected
38 Recording aspect display (DV mode only)
Displayed when recording aspect is set to
[LETTER BOX].