Filter
Top Products
88
[AV OUT SETUP] screen
Item
Display
mode
Description of settings
[HDMI OUT
SEL]
<CAMERA>
<PB>
(AVCHD
mode only)
Sets the video format of the <HDMI> output.
[1080i/720P]: Outputs at the resolution set in [REC FORMAT].
[DOWN CONV]: <HDMI> is output at 480P.
[DOWNCON
MODE]
<CAMERA>
<PB>
(AVCHD
mode only)
Switches down-conversion output mode.
[SIDE CROP]: Crops the left and right edges. Images output from the
external output terminals <VIDEO OUT>, <HDMI> will have
portions which extend beyond the edges of the screen and
cannot be seen.
[LETTER BOX]: Adds black bands at the top and bottom of the image.
[SQUEEZE]: Squeezes images horizontally.
[HP MODE] <CAMERA> Selects the sound heard from the headphones.
[LIVE]: The sound input from the microphone is output as is. This
setting is selected when delays in the sound are annoying.
[RECORDING]: The sound in the status to be recorded (the sound
synchronized with the images) is output.
[TEST TONE] <CAMERA> Sets test tone output to channels 1 and 2 when BARS setting is ON.
[LEVEL1]: Outputs the 1 kHz test tone.
[LEVEL2]: Test tone is output at lower volume than LEVEL1.
[OFF]: Does not output the test tone.
[VIDEO
SETUP]
<CAMERA>
<PB>
Sets the setup level of video signals.
[0%]: <VIDEO OUT> terminal output and recording setup levels
will both be set to 0%.
[7.5%A]: <VIDEO OUT> terminal output setup level will be set to
7.5%, while recording setup level will be set to 0%.
[AUDIO OUT] <CAMERA>
<PB>
Sets the audio signals to output from the <AUDIO OUT> terminal (A/V OUT).
[CH1/CH2]: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals
[CH1]: CH1 terminal = CH1 signals, CH2 terminal = CH1 signals
[CH2]: CH1 terminal = CH2 signals, CH2 terminal = CH2 signals
•
When a memory card containing 5.1 channel content recorded on another
equipment is played back on the camera, it is down-mixed to 2 channels when
output through the <AUDIO OUT> and headphone terminals.
is the factory default mode.