Filter
Top Products
- 110 -
∫ If scenes do not change smoothly when played back on another
device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using another
unit.
≥ Just how smoothly the scenes will be played back depends on the playback unit. Depending on
the unit used, the images may stop moving and become still for a moment even when none of the
following conditions are applicable.
≥ A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at every
4 GB of data when played back with another device.
Others
Problem Check points
If the SD card is inserted in
this unit, it is not
recognized.
≥ If the SD card is formatted on a PC, it may not be recognized
by this unit. Use this unit to format SD cards. (l 28)
The wireless remote
control does not function.
≥ [REMOTE CONTROL] of the [OTHER FUNCTION] is [OFF].
(l 25)
≥ The button-type battery of the wireless remote control may be
run out. Replace it with a new button-type battery. (l 25)
Principal reasons for not playing back smoothly
≥ The recording format [PS] was switched to another recording format when a scene was
recorded
≥ When the scenes were recorded on different dates
≥ When scenes lasting under 3 seconds have been recorded
≥ When PRE-REC was used for recording
≥ When deleting scenes
≥ When scenes recorded more than 99 scenes on the same date
AG-AC90-VQT4M99_mst.book 110 ページ ２０１２年９月２５日 火曜日 午後１２時６分