Panasonic AG-AC90PJ Camcorder User Manual


 
- 49 -
Adjusting the audio input level
Adjusting the input level of the built-in microphone (5.1 ch)
Set the [MIC SETUP] to anything other than [2ch]. (l 45)
1 Select the menu.
2 (When [SET]/[SETr ] is selected)
Touch / to adjust the microphone input
level.
Touch to activate/disactivate ALC. When ALC is
activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When ALC is
disactivated, natural recording can be performed.
Adjust the microphone input level so that the last
2 bars of the gain value are not red. (Otherwise, the sound
is distorted.) Select a lower setting for microphone input
level.
3 Touch [ENTER] to set the microphone input
level and then touch [EXIT].
is displayed on the recording screen when the ALC
is turned on.
When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.
You cannot record with the audio completely muted.
: [RECORD SETUP] # [5.1ch MIC LEVEL] # desired setting
[AUTO]: ALC is activated, and the recording level is adjusted automatically.
[SET]/[SETr ]: The desired recording level can be set.
MENU
A Center
B Front left
C Back left
D Front right
E Back right
F Microphone input level
AG-AC90-VQT4M99_mst.book 49 ページ 2012年9月25日 火曜日 午後12時6分