Filter
Top Products
26
With this unit, the time code value is adjusted in
accordance with the format and frame rate. For
this reason, bear in mind that making a change in
the format or frame rate may result in discontinuity
from the last time code value of the previous
recording.
Adjustments are made in 4-frame increments when
the recording format is 24P.
Recording format
Time code
adjustment
1080/24P
720/24P
Adjustable in
4-frame increments
Charging the built-in battery/Setting the time code (continued)
4
When the screen below appears, set the
time code value.
Tilt the Operation lever in the
directions
and select time code value.
Tilt in the direction to move to the next digit,
and tilt in the
directions again to select
value.
You can reset the time code to zero by pressing
RESET/TC SET button.
POWER
FOCUS
..
BARS
EVF DTL
CH1 SEL
INT
(
L
)
ON
OFF
ON
OFF
INPUT1
AUDIO
MIC POWER +48V
INPUT1 INPUT2
INPUT2
INPUT1
INPUT2
CH2 SEL
WFM
COUNTER-RESET/TC SET
ZEBRA OIS
Camera
5
Push the Operation lever when you have
finished setting the time code.
6
Tilt the Operation lever in the direction to
move to YES, and push the Operation lever.