Filter
Top Products
32
Playback settings (PLAY SETUP)
Make settings for playback format and method.
Set playback format (PB FORMAT)
Set format for playback.
1
Press the MENU button.
Menu operation (Page 44 of Vol.1)
2
Select the PB FORMAT item in the PLAY
SETUP screen, and push the Operation
lever (or tilt in the
direction).
3
Tilt the Operation lever in the directions
to select the format for playback, and push
the Operation lever.
The setting for the REC FORMAT item on •
the setting menu SCENE FILE screen is
reflected as the initial setting.
Clip numbers will be displayed in black •
where playback is possible, and in red where
playback is not possible.
Even if the playback format is changed, the •
format set in the REC FORMAT item on the
settings menu SCENE FILE screen will be
restored when the camera is switched to CAM
mode.
If the playback format does not conform to the •
clips created at the relay destination using the
relay recording function, thumbnail images
will not be displayed (! will be displayed).
Thumbnail images will be displayed when the
playback format is matched to the clips.
Repeat playback (REPEAT PLAY)
Use this setting to repeatedly play back all
available clips.
1
Press the MENU button.
Menu operation (Page 44 of Vol.1)
2
Set the REPEAT PLAY item in the PLAY
SETUP screen to ON.
3
Press the MENU button to return to the
thumbnail screen.
The repeat playback indicator will be displayed.
When the playback operation is performed, the
playable clips are played back repeatedly.
Repeat playback will continue until playback •
is paused.
To turn the repeat playback setting off, select •
OFF in step
2.