Filter
Top Products
46
Screen displays (continued)
(Continued on the next page)
The AWB error message (LOW LIGHT / •
LEVEL OVER) is displayed. (Page 42 of
Vol.1)
The functions allocated to the USER buttons •
are displayed while you hold down the DISP/
MODE CHK button.
6 Microphone level automatic control display
Appears when in the setup menus,
RECORDING SETUP screen, MIC ALC, you
haveselected“ON”.
7 Marker luminance display
When markers are displayed, the brightness
level around the center of the screen is
indicatedas0%to99%.“99%↑”appearsifthe
percentage is over 99.
When the AREA Y-GET function is operating, •
the brightness level around the center of the
AREA frame is displayed.
8 Date and time display
Month
mmm dd yyyy hh:mm:ss
Day of the month
Year:
2001 - 2039
Hours
Minutes
Seconds
9 Frame rate display
Displays recording frame rate.
Not displayed when set to 1080/60i.
10
Shutter speed
display
The shutter speed is displayed here.
11 Audio level meter display (Page 18)
12 Auto iris control display
STD: Standard auto-iris control
SPOT:
Auto iris control for spotlight
BACK
: Auto iris control for backlight
compensation
13 Iris display
Displays F value. The STEP of the display
value differs depending on the lens.
14 Zoom position display
The zoom poison is displayed with Z00
(maximum wide-angle) - Z99 (maximum zoom).
The unit can be switched to mm in the ZOOM
& FOCUS item of the setting menu DISPLAY
SETUP screen.
The focus position display does not move
linearly.
15 Focus control information display
Displays the focus control information with 99 - 00.
In the auto focus mode, AF appears. In the manual
focus mode, MF appears.
The units can be switched between feet and
m in the ZOOM & FOCUS item of the setting
menu DISPLAY SETUP screen.
The focus position display does not move
linearly.
16 ND filter display
ND filter selected is displayed.
17 Gain display
Displays the gain value of the image amplifier
configured. (During the auto mode, AGC is
displayed.)
18 AWB information display
Displays the information of white balance.
ATW: When ATW is set
P3.2K/P5.6K/VAR
: In the case of preset
Ach/Bch: In the case of A/B
LOCK: When ATW is locked
19 Marker display
During shooting, pressing the ZEBRA button
once or twice will display the marker.
20 Optical Image Stabilizer
display
Displayed when Optical Image Stabilizer is ON.
21 Scene filename display (Page 19)
22 Remaining battery capacity display
When using Panasonic-manufactured batteries
compatible with this product, the remaining
battery capacity is displayed in minutes.
Time remaining will be displayed after a brief
pause.
The battery display will change •
→ → → →
as battery capacity decreases. will be
displayed in red when less than 3 minutes
are remaining, and
will flash when the
battery is empty.