Filter
Top Products
–94–
Playback—Checking Recorded Contents
Pressing the PLAY button allows black-and-white playback images to be viewed on the view-
finder. Playback images can also be viewed in two other ways.
¡Rec review: When the RET switch has been set to REC CHECK by MAIN FUNCTION on the
setting menu, it is possible to view the last 2 seconds of the recording in the form of black-and-
white images in the viewfinder.
¡Color playback: Connecting a color monitor to the unit’s VIDEO OUT connector allows color
playback images to be viewed on the monitor.
The playback signal is output to the viewfinder even during rewind (REW) and fast forward (FF).
Audio output selection and volume adjustment for the playback signal are performed by the
MONITOR switches and knobs on page 13.
Rec Review
If recording is paused and the RET button on the lens is pressed, the tape is automatically re-
wound and the playback images for the last two seconds appear on the viewfinder. This allows
the recording status to be checked.
After playback, the unit returns to the recording start standby status. Holding down the RET but-
ton rewinds and plays back up to 10 seconds of the tape.
|Note{
The rec review function cannot be used unless recording has been performed for more than
1 second.
Color Playback
Connecting a color monitor to the VIDEO OUT connector of the unit allows color playback im-
ages to be viewed on the monitor.