Panasonic AK-HCU200ES Camera Accessories User Manual


 
27
Item setting operations (settings)
The current settings are displayed on the setting screen
When you change a setting and then select the “SET” button on the
screen, the new value is reflected on the unit
When a setting has also been changed on the unit, the value that
was set last takes priority
In a case like this, there may be a discrepancy in the values set
When a setting outside the setting range is selected using
keyboard input and the “SET” button is selected, the input check
will result in an error
In a case like this, the setting item will be restored to its original
value
Notes
Description of menus
Initial screen
This is the screen that appears first when a connection is established to
the URL you specified on the computer
The menu for the “SETTING1” item on the “OPERATION” menu is
displayed
Items when the OPERATION menu is
selected
Display the SETTING1 screen
Display the SETTING2 screen
Display the HD/SD PHASE screen
Display the BAR ID screen
Display the INCOM/MIC screen
SETTING1 Screen
indicates the factory default setting
Item
Setting
value
Remarks
CCU MODE
5994 Hz:
1080/5994i
1080/50i
Set the format of the signal to be output
from the unit
50 Hz:
1080/5994i
1080/50i
SDI RETURN 1
HD
SD
Set the format of the return signal to be
input to [HD/SD SDI 1] of the RETURN
IN connectors
SDI RETURN 2
HD
SD
Set the format of the return signal to be
input to [HD/SD SDI 2] of the RETURN
IN connectors
SDI OUTPUT 1&2
HD
SD
Set the format of the signals to be
output from [1] and [2] of the HD/SD
SDI OUT connectors
SDI OUTPUT 3&4
HD
SD
Set the format of the signals to be
output from [3/PM] and [4/PM] of the
HD/SD SDI OUT connectors
SDI OUTPUT 3&4
(NORMAL/PM)
NORMAL
PM
Set the signal to be output from [3/PM]
and [4/PM] of the HD/SD SDI OUT
connectors
NORMAL:
Output the main line images
PM:
Output the picture monitor images
COMPOSITE
(NORMAL/PM)
NORMAL
PM
Set the signal to be output from
[OUT/PM] of the VBS connectors
NORMAL:
Output the main line images
PM:
Output the picture monitor images
When the SDI OUTPUT3&4 (NORMAL/PM) item and COMPOSITE
(NORMAL/PM) item are set to “NORMAL”, the menus and statuses
will not be able to be displayed because the picture monitor images
will not be output
When you set one of items to “NORMAL”, set the other one to “PM”
When you set both of the items to “NORMAL”, priority is given to
the setting of the SDI OUTPUT3&4 (NORMAL/PM) item and the
COMPOSITE (NORMAL/PM) item is set to “PM”
Web settings (Continued)