Filter
Top Products
-46-
■ Setting to initial set
In case of the wrong setting in any use mode, take the
following steps to return to the initial settings.
(1) Select [Initialize Data] on the main menu screen of
each Use Mode. (See page 29.)
Press the YES/ABC switch, then [Initialize Data]
screen shown for about 10 seconds.
** Initialize Data **
(Halogen Mode)
Do you want to
initialize Halogen
Mode settings?
O.K. : YES SW
Cancel : NO SW
Halogen Mode
Initialized
Halogen Mode
unchanged
qwe
(2) Press the YES/ABC switch within about 10 seconds
to return to the initial settings, the existing settings
are initialized, the screen shown at w, and the cam-
era returns to be ready for operation.
(3) If the NO/BAR switch is pressed, or if the YES /ABC
switch is not pressed, within about 10 seconds, the
screen shown at e, and the camera returns to the
original settings and is ready for operation.
SETTING TO INITIAL SET