Filter
Top Products
-35-
Neither Sharpness nor Super DTL is valid for con-
tour correction if Detail Level setting !8 is in the
OFF position.
!8 Detail Level Setting [Level: OFF/LOW/HIGH]
Detail level can be adjusted when Detail Select set-
ting !7 is at Sharpness. Super DTL level can be
adjusted when it is at Super DTL.
In case of using the RCU (RCB), the above can be
adjusted with the contour correction switch (DTL).
IRIS
MAN
AUTO
1000
S/S
ELC
500
120
OFF
SHUTTER SCENE
21
3
USER
SET
OFF
ON
+18
+9
0(dB)
+6
OFF
−6(dB)
GAIN
BAR
CAM
HIGH
LOW
OFF
RCB
DTL
AGC
R B
R B
PED
TOTAL
PED
A
B
ATW
AWC
AUTO
HOLD
ABC
AUTO/ATW
PAINTING
GAIN
RCU (RCB)
DTL
!5 Subcarrier Phase Fine Adjustment [SC Fine:
–511 - +511]
Fine adjustment of subcarrier phase can be made
when a genlock signal is supplied.
!6 Color Bar Setup Setting [Color Bar Set:
0.0IRE/7.5IRE]
The setup level of color bar can be adjusted.
!7 Detail Select Setting [DTL Select: Sharpness/
Super DTL]
If contour correction is not sufficient at the
Sharpness position when Detail Level setting !8 is
set to LOW or HIGH, select the Super DTL position.
!9 Noise Suppress Level Setting [Noise Suppress:
OFF/LOW/HIGH]
Screen noise can be reduced when Detail Level
setting !8 is at HIGH or LOW.
@0 Clean DNR Setting [Clean DNR: OFF/LOW/HIGH]
Clean DNR effect can be selected.
@1 Detail Flesh Tone Level Setting [DTL Flesh Tone:
LOW/MID/HIGH]
LOW: Skin color coarseness is suppressed.
MID: Standard
HIGH: Skin color is emphasized.
Note