![](http://pdfasset.owneriq.net/d/61/d61e0a8b-b8a5-4508-8ff5-da17154b4713/d61e0a8b-b8a5-4508-8ff5-da17154b4713-bg64.png)
Operating Instructions
100
4.5 Setting Sensor Log Notification
A sensor log sent once a day at a specified time can be checked. To enable Sensor
Log, set Motion Detection for Trigger Setting and check [Enable].
1. Click [Sensor Log] on the Setup page.
• When enabling the image/buffer transfer setting and selecting Motion
Detection in the Trigger page, the Sensor log window is displayed.
2. Set each parameter.
3. Click [Save].
• Clicking [Cancel] cancels your settings without saving changes.