Filter
Top Products
Operating Instructions
91
Setting Description
Server IP
Address or
Host Name
*1
*1
Note that [Space], ["], ['], [&], [<] and [>] are not available.
• If you set a server IP address, set 4 numbers (0—255) and 3
periods, such as "192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
Port No. • Enter a number (1—65535). Usually set to 21.
Login ID
*2
*2
Note that ["] is not available.
• If your ISP requires a login ID, set it (0—63 characters).
Password
*2
• If your ISP requires a password, set it (0—63 characters).
Login Timing • Select the login setting for the FTP server. If you set [One
Time] and the image buffer frequency value is set within 1
minute, the camera logs in to the server only once. This can
reduce transfer time.
Upload File
Name
*1
• Set a file name on the FTP server to receive the transferred
files. Enter 1—234 characters. Entering "\" creates directories
for a file. (E.g. NetworkCamera\image)
Overwrite
Setting
• Selecting [Overwrite File] overwrites the image on the server
with a newer image. Selecting [Save as New File with Time
Stamp] saves the image attaching time stamps on the file
name, and the images are not overwritten.
(E.g. image20050101093020500.jpg) The underlined
numbers mean "9h30min20s500ms on January 1, 2005". The
letter "s" is inserted after the day when referring to a summer
time zone.
Data
Tran sfer
Method
• Select [Passive Mode] normally. If the transfer does not work,
select [Active Mode] and check the operation.