Panasonic BL-VP100 Security Camera User Manual


 
[VGA] The letters “VGA” will turn green and images in the main area will be displayed
in VGA size.
[QVGA] The letters “QVGA” will turn green and images in the main area will be displayed
in QVGA size.
[640x360] The letters “640x360” will turn green and images in the main area will be
displayed in 640 x 360 (pixels).
[320x180] The letters “320x180” will turn green and images in the main area will be
displayed in 320 x 180 (pixels).
[800x600] The letters “800x600” will turn green and images in the main area will be
displayed in 800 x 600 (pixels).
[1280x720] The letters “1280x720” will turn green and images in the main area will be
displayed in 1280 x 720 (pixels).
Note
When “1280x720” is selected for the image capture size, it may become smaller than the actual
size depending on the window size of the web browser.
The buttons [VGA], [QVGA] and [800x600] are displayed only when “4:3” is selected for “Aspect
ratio”.
The buttons [640x360], [320x180], and [1280x720] are displayed only when “16:9” is selected for
“Aspect ratio”.
[Image quality] buttons
These buttons will be displayed only when a JPEG image is displayed.
[1] button: Images in the main area will be displayed in accordance with the setting for “Quality1” of
“Image quality setting”. (®page 47)
[2] button: Images in the main area will be displayed in accordance with the setting for “Quality2” of
“Image quality setting”. (®page 47)
[AUX] buttons
*2
These buttons will be displayed only when “AUX output” is selected for “Terminal 3” of “Alarm” on the setup
menu. (®page 77)
[Open] button: The letters “Open” on the button will turn green and the status of AUX connector will
be open.
[Close] button: The letters “Close” on the button will turn green and the status of the AUX connector
will be closed.
Note
The names of “AUX”, “Open” and “Close” can be changed. (®page 83)
[Zoom] buttons
*2
: Click this button to adjust the zoom ratio to the “Wide” side.
: Click this button to set the zoom ratio to x1.0.
: Click this button to adjust the zoom ratio to the “Tele” side.
[Auto mode]
*2
Select an operation from the pull-down menu and click the [Start] button. The selected operation will start.
Click the [Stop] button to stop the operation.
The selected operation will stop when the camera (panning/tilting/zooming) is operated or when an action
that is to be taken according to the settings for “Self return” (®page 55) or for “Camera action on
alarm” (®page 79) starts.
Operating Instructions 11
1 Monitor images on a PC