Panasonic BL-VP100 Security Camera User Manual


 
J
Functions Outline of functions
A Pan/tilt
*2
VT164W
VT164W
VT164
VT164
Controls the camera direction. The camera will pan or tilt to each direction
by pressing the corresponding dial key.
B Zooming control
*2
VT164W
VT164W
VT164
VT164
It is possible to perform zooming operations of the camera by pressing “*”
or “#”.
C Refresh Refreshes the camera images by pressing the dial key “5”.
D Resolution control Changes the image capture size by pressing the dial key “0”.
Image in the aspect ratio of “4:3”
Changes the image capture size
between 320x240 (default) and
640x480.
Image in the aspect ratio of
“16:9”
Changes the image capture size
between 320x180 (default) and
640x360.
Note
Some cellular phones cannot change the image capture size even
when resolution is changed by resolution control.
E Image quality
control
It is possible to change the image quality between “Quality1” and
“Quality2”. (®page 47)
F Home position
*2
VT164W
VT164W
VT164
VT164
The camera will move to the home position (®page 55). Home position
will be displayed only when home position is set.
G Preset
*2
VT164W
VT164W
VT164
VT164
The camera will move to the designated preset position to display images
by pressing the dial key corresponding to the desired channel. (The dial key
numbers are not displayed for Preset No 5 or greater. Only preset IDs will
be displayed for them.) (®page 65)
H AUX control
*2
VT164W
VT164W
VT164
VT164
Controls the AUX terminal.
These buttons will be displayed only when “AUX output” is selected for
“Terminal 3” on the setup menu. (®page 77)
I Privacy Mode
VT164W
VT164W
VT164
VT164
Select “Privacy Mode” to activate Privacy mode.
J Disable Privacy
Mode
VT164W
VT164W
VT164
VT164
Select “Disable Privacy Mode” to return to the normal display.
Operating Instructions 21
2 Monitor images on a cellular phone/mobile terminal