Filter
Top Products
Notes:
• The HOME setting should be selected when you
want to normally leave the camera in the home
position and occasionally perform pan and tilt,
or when you want to activate SEQ.
• PATR1-4 displays only the set number of patrol
routines (page 35).
(5) Auto Mode Setting (AUTO MODE)
Use the auto mode setting to specify the camera
movement mode (OFF, SEQ, SORT, AUTO PAN,
PATROL 1~4, AUTO TRACK).
After selecting AUTO PAN, you can use the AUTO PAN
setting menu to configure detailed settings.
1. Move the cursor to AUTO MODE, and then tilt the
joystick left or right to select a camera movement
mode setting.
OFF :Manual movement only
SEQ :Sequentially switches between preset
positions in position number sequence.
(sequential movement)
SORT :
Sequentially switches between preset
positions counterclockwise, starting from
the camera home position. (sort movement)
AUTO PAN:
Camera pans automatically within the range
specified by PAN. Selecting AUTO PAN and
pressing the CAM (SET) button will display the
AUTO PAN setting menu, which can be used
for configuring detailed settings. (page 34)
PATROL 1 to 4:Operates the camera in accordance
with patrol function settings.
AUTO TRACK:Auto tracking is done for moving
objects under the following conditions.
The moving object must be larger than one
of the screen blocks (1/48 of screen area),
it must have 5 % comparative contrast with
the background image.
Notes:
• Automatic tracking covers a range from
horizontal to directly below the camera. The
digital flip function (page 37) does not operate.
Also, the pan range can be limited by using the
PAN LIMIT setting (page 34).
• The automatic tracking function incorporated in
this system easily tracks moving objects on
screen. Moving subjects are not automatically
tracked in the following situations.
• When multiple moving subjects are on screen
• When the subjects are moving very fast
• When the subject has little contrast
• When moving objects are either large or small
• When the image is dark
• When the image flickers
Tilting the joystick cycles through settings in the
sequence shown below.
(3) Home Position Setting (HOME POSITION)
A currently configured preset position can be
designated as the home position.
Pressing the HOME button of the system controller will
cause the camera to move to the currently specified
home position. Use the following procedure to make a
preset position the home position.
1. Move the cursor to HOME POSITION, and then tilt
the joystick left or right to select the position
number of the preset position you want to make the
home position.
This causes the preset position whose position
number you select to become the home position. If
you do not want to use the home position function,
select OFF for the HOME POSITION setting.
(4) Self Return Setting (SELF RETURN)
The self return setting can be used to specify automatic
return to a particular mode if a certain amount of time
elapses without any operation being performed.
1. Move the cursor to SELF RETURN, and then tilt the
joystick left or right to select a self return trigger setting.
Tilting the joystick cycles through the self return
display in the sequence shown below. (unit: sec,
min)
2. If you selected any setting other than OFF in step 1,
press the CAM (SET) button and then tilt the
joystick left or right to select a self return mode.
OFF :In the auto mode, exits the auto mode
when the trigger time elapses.
AUTO (AUTO MODE setting not OFF) : Returns to
the auto mode when the trigger time
elapses.
AUTO (AUTO MODE setting OFF) : Returns to the
home position when the trigger time
elapses.
HOME :Returns to the home position when the
trigger time elapses.
APAN :Activates auto pan when the trigger
time elapses.
SEQ :Activates the sequence function when
the trigger time elapses.
SORT :Activates the sort function when the
trigger time elapses.
PTR 1 to 4:Activates the patrol function when the
trigger time elapses.
TRK :
After the trigger time elapses, the
camera returns to the home position and
then automatic tracking starts. Following
that, after a set time, the camera returns
to the home position and starts to
continue automatic tracking.
-33-
30MIN ↔ 20MIN ↔ 10MIN ↔ 5MIN ↔ 3MIN ↔ 2MIN ↔ 1MIN
OFF ↔ 1S ↔ 2S ↔ 3S ↔
.......
↔ 10S ↔ 20S ↔ 30S ↔ 40S
60MIN
50S
↔↔
↔↔
OFF ↔ AUTO ↔ HOME ↔ APAN ↔ SEQ ↔ SORT
TRK ↔ PTR4 ↔ PTR3 ↔ PTR2 ↔ PTR1
OFF ↔ SEQ ↔ SORT ↔ AUTO PAN ↔ PATROL1 ↔ PATROL2
AUTO TRACK ↔ PATROL4 ↔ PATROL3
WV-CW964 05.10.18 11:09 AM ページ33