Filter
Top Products
-50-
Problem
Cause and Recommended Action
Reference Pages
Poor picture color
• Is the dome cover or lens of the camera dirty? If so,
clean them.
7
• Use the special setup menu to adjust picture
quality.
42
• Check the white balance setting.
29
Image flicker
• If Super Dynamic 3 is turned on, turn it off.
26-27
Afterimages in
the picture
• Check the DNR setting.
29
Black and white picture
• The camera has an auto black and white switching
mode function. Check the setting of this mode.
29
Frequent switching
between the color and
the black and white
modes
• Adjust the black and white mode switching level,
and the duration time setting.
29
White specks in the
picture
• Use the PIX OFF function to perform blemish
compensation.
42
Menu does not open.
• Is the camera connected correctly? See the
operating instructions that come with the system
controller you are using.
—
• Are camera communication settings configured
correctly?
13-15
19-20
21
A circular object
appear in the picture
(when the camera is
pointing straight down)
• This is caused by the shape of the dome cover and
is not a malfunction.
7
WV-CW964 05.10.18 11:09 AM ページ50