Filter
Top Products
-52-
Power cord sheathing is
damaged.
• The power cord is damaged. Continued use creates the risk of
electric shock and fire. Immediately unplug the power plug and
contact a qualified service person or system installer for servicing.
Power cord becomes
hot during operation.
Power cord becomes
warm or hot when it is
bent or stretched during
use.
● Periodically check the power cord.
The camera movement
mode (OFF, SEQ,
SORT, AUTO PAN,
PATROL, AUTO
TRACK) setting
changes.
• Check the self return function.
33
Problem
Cause and Recommended Action
Reference Pages
Camera position is
different from the
preset position setting.
• Perform REFRESH from the special setup menu.
43
Picture is different from
the position setting.
• Adjust the picture using the preset menu and a
scene file.
31-32
Upper part of the picture
is black when the camera
is in a horizontal
orientation.
• This is caused by the camera's internal cover. It
does not indicate malfunction.
38
Camera suddenly starts
to pan by itself.
• If the cleaning function is turned on, this is normal
does not indicate malfunction. Check the
CLEANING settings.
38
• If the cleaning function is not turned on, this
symptom could be due to noise.
8, 11
WV-CW964 05.10.18 11:09 AM ページ52