Filter
Top Products
- 182 -
Wi-Fi
Connecting Easily to a Smartphone/tablet (NFC)
Using the NFC “Near Field Communication” function, you can easily transfer data necessary
for a Wi-Fi connection between this camera and the smartphone/tablet.
You can use the following functions by controlling this camera remotely with your smartphone/
tablet.
–
Remote recording (P178)
–Playing back the pictures in the camera (P178)
–
Saving the pictures in the camera to the smartphone/tablet, or sending them to WEB services. (P178)
–Sending the acquired location information to the camera. (P178)
1 Launch “Image App” on your smartphone/tablet.
2 Touch the smartphone/tablet to [ ] of the camera.
•
This function can be used even while the camera is
turned off.
3 When the connection confirmation screen is
displayed, press 2/1 to select [Yes], and then
press [MENU/SET].
4 Touch the smartphone/tablet to [ ] of the camera
again.
•
When the smartphone/tablet has connected, an image of
this
camera will be displayed on the smartphone/tablet.
• The connected smartphone/tablet is registered to this
camera. A connection can be established with the
operation of steps
1 and 2 from the second time
onwards.
•You can register up to 20 smartphones/tablets. When the number exceeds 20, registrations will be
deleted, starting from the oldest touched one.
•Performing [Reset Wi-Fi Settings] will delete the smartphone/tablet registration.
∫ Compatible models
This function can be used with the NFC compatible device with Android (OS version 2.3.3 or
higher). (excluding some models)
Controlling this camera remotely with a smartphone/tablet by using the NFC
function
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON]. (P211)
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a compatible model.
•Turn on the Wi-Fi function.
•Install the “Image App” in advance. (P176)