Filter
Top Products
- 29 -
Preparation
6
Press [MENU/SET].
• Confirmation screen is displayed. Press [MENU/SET].
7
Select [Yes] to automatically correct the clock, and then press [MENU/
SET].
• Message screen is displayed. Press [MENU/SET].
8
Press 2/1 to select the home area, and then
press [MENU/SET].
• Confirmation screen to operate the altimeter, barometer
and compass is displayed. Select [Yes] to operate them.
Select [Clock Set] in the [Rec] or [Setup] menu, and press [MENU/SET]. (P48)
•
The clock can be reset as shown in steps 5 and 6.
•The clock setting is maintained for 3 months using the built-in clock battery even without the
battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.)
•If the clock is not set, the correct date cannot be printed when you order a photo studio to print the
picture, or when you stamp the date on the pictures with [Date Stamp] (P117) or [Text Stamp]
(P160).
•If the clock is set, the correct date can be printed even if the date is not displayed on the screen of
the camera.
•When [GPS Setting] is set to [ON], the GPS function will operate even when this unit is turned
off. When you bring the camera on an airplane or to a hospital, etc., set [Airplane Mode] to
[ON], and turn off the camera because electromagnetic waves, etc. emitted by the camera
may interfere with gauges. (P53)
Changing the clock setting