Panasonic DMC-FT5/DMC-TS5 Camcorder User Manual


 
- 98 -
Recording
Applicable modes:
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher number enables
pictures to be taken even in dark places without the resulting pictures coming out dark.
For the focus range of flash when [AUTO] is set, refer to P67.
You cannot select [AUTO] or [ ] in Manual Exposure Mode.
The ISO sensitivity is automatically set under the following conditions.
When [Burst] in the [Rec] menu is set to [ ]
When recording motion pictures
The shutter speed is determined by the [Sensitivity] setting as shown in the table below.
[Sensitivity]
Settings Description of settings
[AUTO]
The ISO sensitivity is automatically adjusted according to the brightness.
Maximum [1600]
[]
([i.ISO])
The ISO sensitivity is adjusted according to the movement of the subject and the
brightness.
Maximum [1600]
The shutter speed is not fixed when the shutter button is pressed halfway. It is
continuously changing to match the movement of the subject until the shutter
button is pressed fully.
[100]/[200]/
[400]/[800]/
[1600]/[3200]
The ISO sensitivity is fixed to various settings.
[100] [3200]
Recording location
(recommended)
When it is light (outdoors) When it is dark
Shutter speed Slow Fast
Noise Less Increased
Jitter of the subject Increased Less
[Sensitivity] Shutter speed (Sec.)
AUTO/
The shutter speed changes automatically according
to ISO sensitivity setting.
100/200/400
4 to 1/1300
800/1600
1 to 1/1300
3200
1/4 to 1/1300