- 22 -
Preparation
Inserting and Removing the Card (optional)/the
Battery
•Check that this unit is turned off.
•Confirm that there is no foreign object. (P12)
•We recommend using a Panasonic card.
1
1: Slide the [LOCK] switch A, and release
the lock.
2: Slide the release lever B and open the
side door.
• Always use genuine Panasonic batteries.
• If you use other batteries, we cannot guarantee the
quality of this product.
2
Battery: Being careful about the battery
orientation, insert all the way until you hear
a locking sound and then check that it is
locked by lever C. Pull the lever C in the
direction of the arrow to remove the battery.
Card: Push it securely all the way until you
hear a “click” while being careful about the
direction in which you insert it. To remove
the card, push the card until it clicks, then
pull the card out upright.
D:Do not touch the connection terminals of the card.
3
Close the side door until it clicks, and then
lock the [LOCK] switch by sliding it toward
[2].
• Confirm that the red part on the [LOCK] switch is not
showing.