Filter
Top Products
Advanced (Playback)
78
VQT1J82
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P74)
This mode allows you to automatically
display pictures vertically if they were
recorded holding the camera vertically or
rotate pictures manually in 90° steps.
∫ Rotate display
(The picture is automatically rotated and
displayed.)
1 Press 4 to select [ON] and then
press [MENU/SET].
•The pictures are displayed without
being rotated when you select [OFF].
•Refer to P28 for information about how
to play back pictures.
2 Press [MENU/SET] to close the
menu.
∫ Rotate
(The picture is rotated manually.)
1 Press 2/1 to select the picture
and then press 4.
•The [ROTATE] function is disabled
when [ROTATE DISP.] is set to [OFF].
•Motion pictures and protected pictures
cannot be rotated.
2 Press 3/4 to select the direction
to rotate the picture and then
press [MENU/SET].
3 Press [MENU/SET] twice to close
the menu.
•If you take pictures when aiming the
camera up or down, it may not be possible
to display the pictures vertically.
•The picture may be slightly blurred when
the camera is connected to the TV with
the AV cable (supplied) and played back
vertically.
•When you play back pictures on a PC,
they cannot be displayed in the rotated
direction unless the OS or software is
compatible with Exif. Exif is a file format
for still pictures which allows recording
information etc. to be added. It was
established by “JEITA (Japan Electronics
and Information Technology Industries
Association)”.
•Rotated pictures are displayed rotated
when they are played back in review
playback and playback zoom however are
displayed without being rotated when they
are played back in multi playback.
•It may not be possible to rotate pictures
that have been recorded with other
equipment.
[ROTATE DISP.]/[ROTATE]
To display the picture rotated
/SET
MENU
/SET
MENU
The picture rotates clockwise in
steps of 90°.
The picture rotates
counter-clockwise in steps of 90°.
/SET
MENU
DMC-FX33_ENG.book 78 ページ ２００７年７月９日 月曜日 午後１２時５８分