VQT1R87
64
Advanced (Recording pictures)
¢ The burst speed is constant regardless of the transfer speed of the card.
• The burst speed values given above apply when the shutter speed is 1/60 or faster and when the
flash is not activated.
Note
• When the burst mode setting is set to Unlimited
– The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
– You can take pictures until the capacity of the built-in memory or the card is full.
• The focus is fixed when the first picture is taken.
• When the burst speed is set to [˜], the exposure and white balance are fixed at the settings used
for the first picture for the subsequent pictures as well. When the burst speed is set to [ò], they
are adjusted each time you take a picture.
• When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.
• If you are following a moving subject while taking pictures in a place (landscape) indoors, outdoors
etc. where there is a large difference between the light and shade, it may take time until the
exposure is stable. If burst is used at this time, the exposure may not become optimal.
• The burst speed (pictures/second) may become slower depending on the recording environment
such as in dark places, if the ISO sensitivity is high etc.
• Burst mode is not canceled when the camera is switched off.
•
If you take pictures in burst mode with the built-in memory, it will take time to write the picture data.
• [Œ] is set for the flash when burst is set.
• Auto bracket is canceled when burst is set.
For details on [REC] mode menu settings, refer to P18.
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
·
[OFF]/[ON]
Note
• When [ON] is set, [ ] is displayed on the screen.
• Even when the [SENSITIVITY] is set to [ISO100], [SENSITIVITY] may be set higher than [ISO100]
if the picture is taken with [I.EXPOSURE] set to valid.
• Compensation effect may not be achieved depending on the conditions.
• [ ] in the screen turns to yellow when [I.EXPOSURE] is in effect.
For details on [REC] mode menu settings, refer to P18.
This can enlarge subjects even more than the optical zoom or extended optical zoom.
Applicable modes:
·¿n
[OFF]/[ON]
Note
• Refer to P30 for details.
• If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be set
to [AUTO] or [MODE 1].
[OFF] ˜ ò
Burst speed (pictures/
second)
—2.5
¢
approx. 2
Number of
recordable pictures
A —max. 3
Depends on the remaining
capacity of the built-in
memory/card.
›
—max. 5
[I.EXPOSURE]
) [DIGITAL ZOOM]
VQT1R87.book 64 ページ 2008年6月23日 月曜日 午前11時17分