Filter
Top Products
Recording pictures (basic)
43
Taking Pictures using Burst Mode
1 Press the Single/Burst Mode
Button to switch the burst mode
setting and then take pictures.
: High speed
;
: Low speed
;
:No limit
;
No display (cancelled)
∫ Number of pictures recorded in burst
mode
¢When the shutter speed is higher than
1/60 and the flash is not activated
•In simple mode [ ] (P31), the burst
speed is fixed to Low.
•Keep pressing the shutter button fully to
activate the burst mode.
•If the flash is activated, you can record
only 1 picture.
•When the self-timer is used, the number
of recordable pictures in burst mode is
fixed to 3.
•When the burst mode is activated, the
audio recording function on DMC-FX7
cannot be used.
•When setting auto bracket and the burst
mode simultaneously, auto bracket will be
performed by default.
•When the burst mode setting is set to no
limit, the speed of taking pictures becomes
slow during a recording in burst mode.
•Burst mode will not perform as described
if a MultiMediaCard is used in place of an
SD Memory Card. The reading/writing
speed of a MultiMediaCard is slower than
that of an SD Memory Card.
•The setting of auto review function is fixed
to [1SEC.]. (The picture is not enlarged.)
•Burst mode is not cancelled when the
camera is switched off.
1600
19
Burst speed
(pictures/
second)¢
Number of recordable
pictures (pictures)
DMC-FX7:
3
DMC-FX2:
4
DMC-FX7:
max. 4
DMC-FX2:
max. 5
DMC-FX7:
max. 7
DMC-FX2:
max. 10
2
2
Depends on
the card
capacity
Depends on
the card
capacity
FX2_7-GN.book 43 ページ ２００４年８月２日 月曜日 午後３時４０分