Filter
Top Products
Recording pictures (advanced)
60
∫ Setting the White Balance manually
(White set )
Use this mode when you want to set the
white balance manually.
1 Set to [ ] (White set) and then
press 1.
2 Aim the camera at a sheet of white paper
or a similar white object so that the frame
on the centre of the screen turns white
and then press 1.
∫ Finely Adjusting the White Balance
(White Balance Fine Adjustment )
When you cannot acquire the desired hue
by setting the white balance, you can adjust
the white balance finely.
1 Set the white balance to [ ]/[ ]/
[ ]/[ ]. (P59)
2 Press 3 several times until
[WB ADJUST.] appears.
3 Finely adjust the white balance.
•1 [BLUE]: Press when the hue is
reddish.
•2 [RED]: Press when the hue is
bluish.
About the white balance
•In simple mode [ ], the white balance is
fixed to [AUTO].
•When taking a picture with the flash, the
white balance will be automatically
adjusted [except for [ ] (Daylight)], but
the white balance may not be properly
adjusted when the photo flash is
insufficient.
About the white balance fine adjustment
•The white balance icon on the screen
turns red or blue.
•You can set the value independently for
each of the modes in white balance.
•The setting on the fine adjustment of the
white balance is reflected to the picture
when taking a picture with the flash.
•When you set the white balance using the
White set [ ], the adjustment level is
set to “0”.
•When the colour effect is set to any of
[COOL], [WARM], [B/W] or [SEPIA] (P65),
you cannot finely adjust the white balance.
WHITE SET
SET
CANCEL
MENU
BLUERED
WB ADJUST.
SELECT
EXIT
FX2_7-GN.book 60 ページ ２００４年８月２日 月曜日 午後３時４０分