Filter
Top Products
Preparation
14
Inserting/Removing the Battery
• Check that the camera is turned off and
that the lens is retracted.
1 Slide the card/battery door to
open it.
• Please be sure to use genuine
Panasonic batteries (CGA-S004A).
2 Insert:
Insert the charged battery until it
clicks paying attention to the
direction of the battery.
Remove:
Slide the lock 1 to remove the
battery.
3 1 Close the card/battery door.
2 Slide the card/battery door to
the end and then close it firmly.
• If you will not be using the camera for a
long time, remove the battery. Store the
removed battery in the battery carrying
case (supplied). (P95)
• When fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (The storing may be shorter if
the battery is not charged sufficiently.)
If more than 3 months has passed, the
clock setting will be lost. In this case, set
the clock again. (P18)
• Do not remove the card and the battery
while the card is being accessed. The
data on the card may be damaged.
• The supplied battery is designed only
for use with this camera. Do not use it
with any other equipment.
FX7PP.book 14 ページ ２００４年７月３０日 金曜日 午前１０時３７分