Filter
Top Products
Recording pictures (basic)
43
Optical Image Stabilizer [STABILIZER]
This mode recognizes and compensates
jitters. You can reduce blurring caused by
jitters when you hold the camera with one
hand for taking a picture of yourself or
when you take pictures indoors where the
shutter speed is slowed down.
1 Optical Image Stabilizer button
1 Keep pressing the stabilizer
button until [STABILIZER]
appears and then select the
stabilizer function mode.
• The stabilizer function may not work
sufficiently in the following cases.
– When too much jitter occurs.
– In digital zoom range.
– When taking pictures while following
subjects in motion.
– When the shutter speed is extremely
slow due to dark conditions or other
reasons.
• For jitters, refer to P30.
• In simple mode [ ] or [SELF
PORTRAIT] in scene mode (P53), the
stabilizer function mode is fixed to
[MODE2].
• In Motion image mode [ ], [MODE2]
cannot be set, and the stabilizer function
menu does not appear.
1
SELECT SET
MODE1
MODE2
OFF
STABILIZER
MODE1
()
The stabilizer operates
continuously and can assist
during photocomposition.
MODE2
()
The stabilizer function is in
standby and activates at the
moment the shutter captures the
image. This mode offers a
greater degree of stabilization.
Usually, we recommend setting
to [MODE2].
OFF
()
When image stabilization is not
desired.
FX7PP.book 43 ページ ２００４年７月３０日 金曜日 午前１０時３７分