Filter
Top Products
Preparation
18
Setting Date/Time (Clock Set)
∫ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on, the
following screen appears.
• Press the [MENU] button, the screen
shown in step 2 appears.
• The screen disappears in about
5 seconds. To access clock set menu,
start from step 1.
1 Select [CLOCK SET] from the
[SETUP] menu. (P20)
2 Set date and time.
• 2/1: Select the desired item.
• 3/4: Set date and time.
3 Select [M/D/Y], [D/M/Y] or [Y/M/D].
• Close the menu by pressing the
[MENU] button 2 times after finishing
the setting.
• Check if the clock setting is correct,
after turning the camera off and on.
PLEASE SET THE CLOCK
CLOCK SET
MENU
SETUP
2
/
3
SELECT
EXIT
MENU
CLOCK SET
MENU
NO.RESET
RESET
PC
VIDEO OUT
NTSC
USB MODE
M/D/Y
JAN
11 2004
..
0 00
:
CLOCK SET
EXIT
MENU
SETSELECT
EXIT
10:001
DEC
.11.2004
MENU
M/D/Y
CLOCK SET
SETSELECT
FX7PP.book 18 ページ ２００４年７月３０日 金曜日 午前１０時３７分