Filter
Top Products
Preparation
16
Using the AC Adaptor
You can use the camera without worrying about battery discharge by connecting to
an AC adaptor.
Preparation
• Check that the camera is turned off and that the lens is retracted.
• Close the flash.
1 Connect the AC cable.
2 Open the [DC IN] terminal door.
3 Connect the DC cable.
¬
Suggestions/Tips
¬
• Use the supplied DC cable.
If you use other DC cables, it may
cause a malfunction.
• The camera becomes warm during
use. This is not a malfunction.
• Disconnect the AC adaptor and DC
cable when the camera is not in use.
• The battery cannot be charged in the
camera even if the AC adaptor is
connected.
FZ10-PP.book 16 ページ ２００３年１１月１８日 火曜日 午後１時７分