Filter
Top Products
Preparation
21
Attaching the Lens Hood/Lens Cap
Preparation
• Check that the camera is turned off and that the lens is retracted.
• Close the flash.
ª Lens Hood
1 1 Detach the lens ring.
2 Attach the lens hood.
• In bright sunlight or when there is
backlight, the lens hood will
minimize lens flare and ghosting.
• The lens hood cuts off excess
lighting and improves the picture
quality.
• When detaching the lens hood,
refer to P118.
ª When attaching the lens hood
• When taking pictures with flash, photo
flash is interrupted by the lens hood
and the bottom of the screen becomes
dark. (vignetting effect)
• When taking pictures with flash, we
recommend detaching the lens hood.
ª Lens Cap
1 Attach the lens cap.
• Be careful not to lose the lens cap.
ª When attaching the lens cap
• When you turn the camera off, carry
the camera or play back the pictures,
attach the lens cap to protect the
surface of the lens.
• Detach the lens cap before turning on
the camera in the recording mode.
• Consult the dealer or your nearest
servicenter if you lose the supplied
accessories. (You can purchase the
accessories separately.)
FZ10-PP.book 21 ページ ２００３年１１月１８日 火曜日 午後１時７分